thank you for the reply the first week I had deep burn marks in the shell the default settings were untouched I have also contacted support they assured me that they will replace the shell all good but i certainly don't want this to happen again
my weight is 80 kg and 10 kg of counterbalance due to peddles and yoke system so in total I am looking at 120 kg
Comments
Welcome to YawVr family huni 😘 any problems or if you need advice please ask us here or discord.
thank you for the reply the first week I had deep burn marks in the shell the default settings were untouched I have also contacted support they assured me that they will replace the shell all good but i certainly don't want this to happen again
my weight is 80 kg and 10 kg of counterbalance due to peddles and yoke system so in total I am looking at 120 kg
the shell weighs off the motors 40kg
120kg total is too much I believe. Can you reduce the weight at the front?
hi am in melbourne
just got my yaw2 and also had some rollers completely loose, had to work out their position and the assembly was fine
apart from misaligned holes.
however have been unable to get the chair to work with my pc.
am not sure what software to load and cant find any info on line
my email is svorayo@optusnet.com.au
if you could make cointact it woul be great help.
merry xmas