3D printed Vive Tracker Mount for Motion Compensation
This is a mount I designed for the Vive Tracker for use with Motion Compensation. If you are like me and prefer not to Velcro a controller for MC, then a tracker is the way to go. No tools required. The mount snaps in place. You will need a single screw. 1/4"-20, 3/4" length with a 7/16" hex head. Plenty of options on McMaster-Carr here: https://www.mcmaster.com/screws/hex-head-screws/thread-size~1-4-20/length~3-4-2/head-width~7-16/
You can download the STL on my shared public link for Fusion 360: https://a360.co/3m38wxr
Feel free to remix the design to suit your needs.