Tips for X52 (Pro) mounting plate
Hi all, here is an image with some measurements for mounting an X52 Pro hotas on the YAWVR mounting plates:
This image is for the right side(viewed from sitting in the bowl) where the joystick goes. As you can see I have taken off the handles of the bowl and put the plate one drill hole nearer to the back.
With the plate holes there are 2 possible ways to connect it to the rim of the bowl. (orange cross in the middle)
I have used one original hole (top right of the image) to attach the joystick. If you need to use a 2nd hole I have drawn the location where that should go. I did not use the 2nd hole, but used velcro instead. It's rock solid.
The left side for the throttle part is exactly the same but mirrored.
Comments
Thank You :)
A good alternative is to use adhesive backed AutoLok system. Rock solid when mounted, can be moved to best orientation on the plate, and can be easily removed when not flying.